IMTARUN

How to Recover/Hack Windows XP password using Cain & Abel

singhalkumartarun@gmail.com (tarun kumar singhal) — Fri, 19 Feb 2010 07:39:00 +0000

Introduction:-
In Your Windows XP, 7, VISTA, NT or 2000 system there is a file which store your system password. this file is sam(system account manager) which store all your account information (i.e., user name, password and user setting) and because password can't be saved as it is in a file because it can be hacked easily therefore Windows encrypt this password using a key(this key is stored in System file).
Both System and SAM file is stored at the same location i.e.,

C:\WINDOWS\system32\config

so to recover password we need both these file but because these file are locked so we can not use these file from window so we need other operating system to copy both these files let's say linux(because we can see windows drive in linux so you can go to above location and copy both sam and system file). if you don't have linux it's fine windows store these file in other location also i.e.,

C:\WINDOWS\repair

which Windows does not use so we can copy both files from this directory(but these file are created at the time of disk repair so there are chances that you may not get new password, if you changed your password recently)

How to use "Cain & Abel" To Recover Windows XP Password?
Steps:-

Copy Both System & SAM file from any of the above location.
Download Cain & Abel from here and install it on your System.(antivirus might alert you, but don't worry)
Now open Cain & Abel and go to "Cracker" tab
Now click "+" sign as shown in the figure below.
Now a dialog will appear as shown in the figure above browse to sam file in first field and copy past the hex key by browsing to system file
Now You will see a list of user of the system as shown below.
Suppose among the user in the above list i wanted to recover password of "mac" user name then right click on mac> Brute Force Attack > LM Hashes. now you will see window similar to below image.
Now set your preference in the last window and click start the attack. after it successfully finished performing password recovery it will show you password like in the image below.

Video on Hacking Windows XP Password

NOTE:-Before beginning to Recover password of Your System. i must clear you that this trick should be used to recover your system's password NOT to Hack Other Persons password because by doing that you could go to prison.

How to Make/Create Blog OR Blogspot Tips and Tricks

singhalkumartarun@gmail.com (tarun kumar singhal) — Sun, 24 Jan 2010 11:28:00 +0000

How To Create Blog On Blogspot?
Steps:-

Go to Blogger.com
Login with google/gmail Account or Create an account.
After Login On your DashBoard Click Create a Blog.
Now Choose Your Blog title(theme of your blog) and url(eg imtarun.blogspot.com) and fill verification code using image and then click continue.
Now Select one of the theme/template(Look of your blog) among them and then click Continue.
NOTE:- if you wants more cool,hot template/theme then download them from here
Now Click Start Blogging Link.
Once you have created blog next thing is how to create a post. Below is the figure indicating different component of post that you can use.
Now that you have created post as well the next big thing is how to make your blog popular or in technical terms Search Engine Optimization.

Blogspot Tips and Tricks

How to Remove Navbar?

go to Layout>Edit Html and paste the code as indicated in figure.

#navbar-iframe {
display: none !important;
}
How to Add Keyword and Description of individual post?.
go to Layout > Edit html and in head section paste code as shown below in the image.
Display Ads on Your Site or Google Adsense Remove ads from your site
if adsense have blocked your account then you can make an account on bidvertiser or adbrite.
How to collect Visitor Details(like ip, page visited, came from etc)?
To get information about your latest visitor like it's ip address, country, state, came from which page, visited which page of your site and at what time you need to register at statcounter
How to increase Traffic(visitor) to your site?

Register your site to the following sites:
How to make Post Title, Page Title

or
How to Dynamically change title of Website?
paste below code in your head Tag
How to add An Icon For My Blog or How to add favicon on my site?
- First, Select any image that you want as icon of Your Site.
- Now, Convert it into gif( or ico) 16 X 16 Format.
- After Conversion upload it onto some image hosting site like PhotoBucket.
- Now, goto Layout > Edit HTML and paste below code in Head Section of your site

Windows vs Linux Software Comparison/Learn Linux Ubuntu

singhalkumartarun@gmail.com (tarun kumar singhal) — Mon, 17 Aug 2009 18:00:00 +0000

S. No.	Software	Linux	Windows
1	Office Utility	OpenOffice	MS Office
2	Text Editor	Gedit	Notepad
3	Torrent Client	Bittorrent	Utorrent
4	Media Player	Totem	Window Media Player
5	Command Line	Terminal	Command Prompt
6	Add & Remove Software	Add/Remove Applications	Add or Remove Programs
7	Browser	Firefox	IE,Firefox
8	Email Client	Evolution	Outlook

9	Chat Client	Pidgin	Pidgin, Gtalk, Yahoo! Messenger
10	CD/DVD Burning	GnomeBaker	Nero
11	Programming Tool	NetBeans, Eclipse	NetBeans, Eclipse
12	Video Conferencing	Ekiga	Netmeeting
13	Paint Program	Tux Paint	MS Paint
14	Graphics Editing Program	GIMP	Adobe Photoshop
15	Firewall	UFW (Uncomplicated firewall)	Windows Firewall
16	File Archieve(compress)	PeaZip	Winzip, Winrar, 7-Zip
17	Antivirus	Avast	Nortan, Avira, Avast

Most Useful Firefox Addon

singhalkumartarun@gmail.com (tarun kumar singhal) — Thu, 16 Apr 2009 17:03:00 +0000

DownloadHelper: It helps in downloading videos from site's like youtube, google videos, yahoo videos etc.

Click here to Download DownloadHelper(convert extension from zip to xpi)
Xmarks: It Help in maintaining your bookmarks(i.e store your bookmarks in your account at xmarks site by synchronizing your bookmarks to your database.

Click here to Download Xmarks(convert extention from zip to xpi)
Firebug: Very usefull tool for editing web document(html file) in browser itself(and can see change on click).

Click here to Download Firebug(convert extension from zip to xpi)
Greasemonkey: Very usefull scripting tool used to insert some script which will execute everytime you visit that webpage (for example price comparison in amazon.com).

Click here to Download Greasemonkey(convert extension from zip to xpi)
FlashBlock: Every time you start any site containing a lot of flash constant(most flash file contain ads) it start downloading all the content without asking you and consume a lot of bandwidth(speed) so to instruct which flash to work(start download) you can use FlashBlock.

Click here to Download FlashBlock(convert extension from zip to xpi)
Url Fixer: It is for those people wo made mistake many a time when typing the name of site into url(for example if u type google.con then this plugin will correct it).

Click here to download Url Fixer(convert extension from zip to xpi)
Fireftp: This tool is very useful for web site owner because it helps them upload the file very easily onto there site.

Click here to Download Fireftp(convert extension from zip to xpi)
Adblock plus: Very handy tool for improving the bandwidth use because it block all the ads (for example images ads).

Click here to Download Adblock plus(convert extension from zip to xpi)
SearchStatus: An Seo tool for web developer to see the alexa, pagerank, compete and moxRank Ranks and many more

Click here to Download SearchStatus(convert extension from zip to xpi)
Kallout: It helps you To search on the web just by selecting text and give many option as well(for example if an article is present on the text on wiki it gives you the option).

Click here to Download kallout(convert extension from zip to xpi)
Download Status bar: This addon will integrate your download window in the statusbar of your firefox(this way we can get rid of interrupt of download window of firefox)

Click here to Download Download Status bar(convert extension from zip to xpi)
Answers: Always run for answers.com for problem now it is very easy to get help just alt+click the text to find the answer.

Click here to Download Answers(convert extension from zip to xpi)
Fission: Fission combines address bar and progress bar. This makes the progress bar more visible and has a nice visual effect.

Click here to Download Fission(convert extension from zip to xpi)
Temper data:It is very usefull tool for computer geeks because this can be used to manupulate the outgoing form data such as some hidden value or some no.

Click here to Download Temper data(convert extension from zip to xpi)

How to Speed Up Slow Torrent in Utorrent/Bitorrent

singhalkumartarun@gmail.com (tarun kumar singhal) — Sat, 11 Apr 2009 16:51:00 +0000

There are some Setting in torrent Client that you need to change to Increase your download Speed. Some of the setting(with value) are listed below.

Torrent Download and upload Speed:-
1. Go to Options > Preferences in your utorrent Client.
2. Click Bandwidth option as shown below.
3. Here put zero for both max. upload rate and max. download rate.
Port:-
1. Go to connection option from the same window as shown above.
2. Press random Port option as shown above to change your port.
  
  Note:-The concept behind changing port is that sometimes your isp may block your some ports(active torrents port) so it is good to change your port at regular interval.
Increase TCP Connection:-
1. Download patch from here.
2. Open this file in cmd(open cmd and then run it from there).
  
  NOTE:-
  1. This will increase the limit of no. of connection that you can make. this is for windows xp sp2.
  2. This setting require restart of computer so restart your computer after you have applied all the these settings.
Increase Tracker(Most Effective):-
1. First, download Tracker list from here.
2. Now Go to property of the torrent having slow download speed(right click the torrent in utorrent).
3. Now in the box highlighted above past content of file just downloaded.
4. Make sure "Enable DHT" and "Peer Exchange" and "Local peer Discovery" are checked.
5. Press OK.
  
  NOTE:-make sure you do not include more than 10 tracker for a single torrent.
Make Continues Connection with Internet
1. Make a Batch file(bat extension) with Ping to 192.168.1.1(router/modem) address with unlimited time
  
  OR
  Download file from here. and then change extension from mp3 to bat.
2. Start this file whenever you starts your torrent application.
  
  NOTE:-I have realized that whenever i excess my intenet my torrent download speed remain up but once i go somewhere else or go for sleep speed goes down.
  therefore i made this or use this cmd command to make my torrent client realize that i m working. i can't explain why this is happening but this is working very well on my PC
Tips:-
1. Right click torrent in utorrent and press Update Tracker.
2. Press Force download on torrent required first.
3. Right click torrent required first then go to Bandwidth allocation>high.

How To Setup Outlook to Send Fake Email Spam.

singhalkumartarun@gmail.com (tarun kumar singhal) — Thu, 26 Feb 2009 12:24:00 +0000

Introduction:-
Sending Fake Email through cmd(telnet) is not different from Sending fake email from outlook because here also we are sending Email using telnet. but here one thing has changed that thing is here we are using gui(graphical user interface) which is easy to interact then cui( command user interface). Now to setup outlook to send fake email follow the steps:-

Start outlook express from the start menu you can also start it from all program

NOTE:-Don't use Microsoft Office outlook
Now After it opens go to Tools > Accounts which will bring a window as shown below.
In here click Add followed by Mail which will bring an internet connection wizard.
In here fill the form as follow:-
- fill your Name.
- Came from field of your fake Email.
- Mail Server: POP3
  Incoming Mail Server: '-' //without quotes
  Outgoing Mail Server: See the note
  
  NOTE:-
  1. For Sending Email to Gmail id set outgoing mail server to either
    alt1.gmail-smtp-in.l.google.com OR
    alt2.gmail-smtp-in.l.google.com OR
    alt3.gmail-smtp-in.l.google.com OR
    alt4.gmail-smtp-in.l.google.com
  2. For Sending Email to yahoo id set outgoing mail server to either
    a.mx.mail.yahoo.com OR
    b.mx.mail.yahoo.com OR
    c.mx.mail.yahoo.com OR
    d.mx.mail.yahoo.com
  3. Use comments for knowing outgoing mail server of other email server.
- Click YES for continue anyway.
- Now fill
  username:- '-' //without quotes
  password:- '-' //without quotes
- Click Finish.
Now you are done setting up fake Email account for sending Fake Email.

NOTE:-You can change above setting by going to tools>accounts in here click property of your fake account. for more information click here.
See this Video.

How To change|Spoof IP And Mac Address?

singhalkumartarun@gmail.com (tarun kumar singhal) — Thu, 26 Feb 2009 10:56:00 +0000

Introduction:-
MAC Address(media access control) is the unique Code/Name given to your LAN card that differentiate your computer from any other computer on the internet. mac address sometime also called as Ethernet Hardware Address. Now the question arises if the mac address is unique then how can we change it?
The answer to this question is very simple, the exact address is only known to your Operating System(windows xp) because this is the one who actually interact with hardware And operating system provide allow us to change this address that's why we are able to change our mac address[mac address can not overwritted it can only be spoofed].

Steps:-

Open Network connections from Control Panel.
right click the connection (of which you want to change mac address).
Click Property.
Now the window will appear as shown below in here click configure...
Now a window will appear in here click Advanced Tab.
In here in Property click Network address.
Now in the combo box that appear write the mac address that you want to spoof.
Your mac address now is been spoofed.

NOTE:- you can use softwares like mac makeup to change your mac addres but it is a good practice to change mac address using built in tools.for more information click here

How Do I Forward Internet Port(Port Forwarding)?

singhalkumartarun@gmail.com (tarun kumar singhal) — Sat, 21 Feb 2009 14:50:00 +0000

Introduction:-
Port forwarding refers to opening of closed port so that two or more application over internet can communicate with each other.You can think port as the way through which an application can communicate/reach to you that' why we need port 80 for http page telnet for 23 and ftp for 21.

Port forwarding for different modem/router is different but the theme remain the same in most modem/router.

WAY ONE:-

Steps for port forwarding:-

Go to your browser and type 192.168.1.1(default page for router/modem setting).
In here type the username and password(commonly it is set to admin, admin).

NOTE:- in case username and password is not admin then you can see it on the backside of your router/modem or can call your service provider.
Now you will see the home page of your router in here click advanced link.
in advanced page click port forwarding link which will take you to the page which is similar to the page shown below

the page which you see above is present in almost all router/modem in addition to this some routers also provide you to forward ports directly for some common services like website(at 80), telnet(at 23), smtp(at 25) and many more.

In here type
- rule name :- any thing
- protocol:- depending on port to forward(generally tcp/udp)
- port start:-port to farward
- port end:-same as port start
- port map:- same as port start.

Now apply the change and save all the setting so that after resetting your modem/router your setting remain the same.

WAY TWO:-

In case you are not able to forward port using the above defined technique or not able to find port forwarding link:-

Go to google, yahoo or whatever search engine you use.
Now in search box type port forwarding "company name of router/modem" "model no." To search the article regarding port forwarding for your router.
In case you don't Understand the second point OR not able to search the article for your router then go to portforwarding.com and check some other router of the same company as your router for help.

NOTE:-If even now you are not able to forward your ports then ask your ISP to do it for you.

How to Speed up PC|Computer

singhalkumartarun@gmail.com (tarun kumar singhal) — Sat, 21 Feb 2009 12:48:00 +0000

Introduction:-
This is a very common problem that everyone faces after the pc became somewhat older. The main thing that made your pc work slow down is your hard disk and ram. This is because:-
1) Everything is stored in your hard disk and everything is excessed from your hard disk.
2) Everything that is been excessed use ram.

That's why it depands on these factors. There are method to speed up your computer somewhat faster then before but not as fast as your pc was before when you purchased it.
Follow steps to speed up your computer:-

1)Use Disk Cleanup:-

Type in run "cleanmgr"

for removing unwanted file from you PC

NOTE:- Here you can use some other tool because disk cleanup can not remove all unused files but software like Argente Disk Cleaner search you whole drive for unused file.

2)Speed up access to data:-
In run type "dfrg.msc"

This utility will remove the fragments from your harddisk due to which the excess time of file will get reduce(application now starts faster then before).

3)Detect and repair disk errors:-
In property of drive(c:/d:) go to tool option here click "check now"
OR
In Run Type chkdsk "drive letter":

Some times bad sectors are created in your computer which slows the working of hard disk there for check utility is Created to recover bad sector.

Next Page.

How to Speed up PC|Computer

singhalkumartarun@gmail.com (tarun kumar singhal) — Thu, 12 Feb 2009 16:56:00 +0000

4)Use add & remove program:-

Go to Start> Setting> control panel> Add & romove program.

Now from the list that you see here remove applications that you don't use frequently.

5)Remove Startup program:-

In Run Type "MSCONFIG"

Click the startup tab and uncheck all the program's except your anti virus. because all the other processes that starts at start up only consume Ram
NOTE:-in case some process is required then you can start them youself.

6)Stop unused process:-

In run Type "services.msc"

this window show a list of services that your os provides you but from this list there are many services that a normal user do not require therefor they not useful and should be stoped.
So to stop these process from starting at each startup right click the service that you want to stop and then click property in property set startup type to manual and stop the process. some of the process that can stop are listed below.(below list is for those programs which are not frequently used so stop it at your own risk)

Alerter
Automatic Updates
ClipBook
Indexing Service
Messenger
Net Logon
NetMeeting Remote Desktop Sharing
Protected Storage
Remote Desktop Help Session Manager
Remote Registry
Telnet
Terminal Services

The above list is for disabling some of the unused services of ms windows
NOTE:- an advanced user can set these according to its need.

7)Turn off graphics:-

Right click destop then goto property here change theme to Windows classic.

Incase your computer is working very slow then you should turn graphics off by changing you theme to windows classic.

NOTE:-
1) In case you computer is working very slowly then start the memory.vbe(change extension from txt to vbe) file

creating memory.vbe file.

start Notepad
in here type MYSTRING=(80000000)
save it with any name but the extension should be vbe at desktop
now whenever you computer is getting very slow start this file.

2) For more information click here

How To Remove|Protect|Hide your Entire partition|drive?

singhalkumartarun@gmail.com (tarun kumar singhal) — Sat, 31 Jan 2009 08:55:00 +0000

Introduction:-
diskpart is windows inbuilt program utility, it lets us do many things like making any partition active, changing/assigning drive letter, creating MBR(master boot recorder), extend any volume, create a volume or partition, making any disk online etc. but here i m only telling you about how to hide your drive and also changing drive letter.

Steps:-

First press "win+r" or go to run and type diskpart here and hit enter.
Now type "list volume" to see volume available in here and "list disk" to see disk available in here(see the figure).

Now to hide lets suppose my drive d first type "select volume 2" [for selecting my d drive for processing].
Since we have selected my drive d so now type "remove letter d" for hiding it.
Now once you have done last step your drive will not be seen in my computer[Some times it is required to reboot your system].
Now to give your hidden drive some letter so that it will appear again first type "select volume 2"[my drive d].
Then type "assign letter d" [you can assign any letter except letters assign already].
exit[your drive will appear again].

NOTE:-more detail on diskpart utility is available here

Some Very Useful Windows Xp Hidden Programs List

singhalkumartarun@gmail.com (tarun kumar singhal) — Mon, 19 Jan 2009 17:19:00 +0000

Introduction
There are so many functionality in xp such that microsoft does not require to put some functionality into the start menu or place any shortcut anywhere. it is not that they are not useful, they are useful but are used mostly by computer professional for troubleshooting because a normal user may damage system by using it(low knowledge).
they can be run by typing into the run(win +r).

Some Hidden Programs:-

1)Character Map

Type "charmap"

used for finding unusual characters.

2)Dr Watson

Type "drwtsn32"

It is a debugger used for Troubleshooting purpose.

3)Private character editor

Type "eudcedit"

It is used for creation and modification of characters.

4)Disk Cleanup

Type "cleanmgr"

It is used for getting free space by removing unused file.

5)Clipboard Viewer

Type "clipbrd"

Used to view data present on the clip board.

6)Group Editor

Type "gpedit.msc"

used to manage group policies, and permissions

7)System configuration

Type "msconfig"

Used to see and change the start up program(System programs + Application program).

8)Registry Editor

Type "regedit"

Used to change and see the settings of System application as well as Software application.

9)System Monitor

Type "perfmon"

Very important tool for knowing anything i.e., every type of resources whether it is software or hardware.

10)Network shared folder wizard

Type "shrpubw"

Used for creating shared folder over the network(workgroup/Lan).

11)File siganture verification tool

Type "sigverif"

Used to maintain the integrity of your system It will detect if any of the critical file is changed.
for example delete or rename your logoff.exe file in system32 folder it will automatically changed it back.

12) Microsoft Telnet Client

Type "telnet"

Used to connect any remote computer for file sharing.

13)Driver Verifier Manager

Type "verifier"

Used to monitor your drivers it is useful if any of the driver is creating problem.

14)Windows for Workgroups Chat

Type "winchat"

Used to chat over the workgroup/lan.

15)Check Disk Utility

Type "chkdsk :" //command line

Used to check any disk error on drives.

16)Computer Management

Type "compmgmt.msc"

it is the most important application as for as computer administrator is concerned because this contain all the feature that a computer expert need for troubleshooting.

17)DiskPart

NOTE:-I will update this list as soon as i get more useful hidden application. so be come back.

How to SetUp Remote Assistance to get Help

singhalkumartarun@gmail.com (tarun kumar singhal) — Wed, 14 Jan 2009 13:00:00 +0000

Introduction:-
Remote Assistance is an inbuilt software that can be used to get help from a remote administrator or friend regarding computer software problem and even you can help your friend regarding any problem using it. this feature/software is included into windows xp and later version of microsoft windows and is primarily used by a novice(user) for consulting regarding any problem with computer to expert

Steps:-
1) Start remote assistance bye going through the link

Start > All Program > Remote Assistance.

2) Now click "invite someone to help you" link As shown in the picture.

3) by doing this you will get a screen having three option/ways to do remote assistance.

using windows messenger(easiest).
using email.
save invitation as file(similar to 2nd method)

window showing these option is shown below

click one of these.

4)

Using windows messenger

Sign in windows messenger using hotmail, passport email id if you do not have one create one from here.
Now goto options

actions > ask for remote assistance.

Now select one of your friend for remote assistance(make the Expert your friend for remote assistance if he/she is not in your friend list).
Set time limit and password and give this password to the expert.
expert is now prompt for password on entering a conformation message is displayed on the user computer.
You are now connected.

Save invitation as file And Using email

Set time limit and password for security.
Save it to the desktop.
Send this file to the expert through email or using any email client having send file functionality like gtalk, yahoo messenger or using any portable media like pendrive.
Open this file on the experts computer and type the password that user has set.
Now user will be promted that the expert is trying to connect to your computer, so press ok
You are now connected.

Note:- because today most of the person do not have static ip so you will not be able to do remote assistance directly. for that you can use hamachi, more information on hamachi is available here
more information on remote assistance click here

Google Search Tips and Tricks

singhalkumartarun@gmail.com (tarun kumar singhal) — Wed, 24 Dec 2008 06:04:00 +0000

Search all Pages of a Site:-

site:"name of site"

for example.

site:http://imtarun.blogspot.com/

Using site: operator we can search all pages of site.

Search Title of Web Pages:-

intitle:"search string"

for example.

intitle:"search free ebooks"

using intitle: operator we can search title of web pages for a particular string.

Search Free ebooks:-

intitle:index.of? (pdf|chm) "ebook name"

For example.

intitle:index.of? (pdf|chm) hacking

above command search all Open directory for ebooks.

Search Free Music and Movies:-

intitle:index.of? (mp3|dat|mpg|mpeg|rm|rmvb|3gp|flv|mkv|avi) "Music or Movie name"

For example.

intitle:index.of? (mp3|dat|mpg|mpeg|rm|rmvb|3gp|flv|mkv|avi) songs

above command is used to search music and movies. if you want movie in a format other than listed above then add yourself using | after avi.

Search Particular Type of File(filetype:):-

"file to search" filetype:"file type"

For example.

syllabus filetype:pdf

filetype: operator is used to search a particular type of file for example pdf(ebook), txt(text file) etc.

Search words in url of web pages(inurl):-

inurl:"string to search"

For example.

inurl:hacking

inurl: operator is used to search some words in the url of web pages.

Google Search Tips

Use double quotes for searching given string e.g. "computer and networking tricks" using double quotes we will get result having whole string in the sequence as written above.
use + and - sign to include pages having word(+ ahead of it) and exclude pages having word(- ahead of it) e.g. computer and networking +tricks -tips the result will have page that contain tricks and do not have that contain tips.
put * in your search string where you are doubt full about the word or phrase. for e.g. hacking is * that will search page having phrase shown with some wild card terms.
use OR operator where you want to search terms contain either of its operands for e.g. tips OR tricks this will search pages containing either tips or tricks.

NOTE:-

In case you are not used to of this or you don't like it then you can use google's advanced search
Buy "google hacks" ebook of oreilly from here to Learn more on this topic. or search on http://findfreebook.blogspot.com for free ebook on google hacks.

Remote Desktop For Computer Having Dynamic ip

singhalkumartarun@gmail.com (tarun kumar singhal) — Tue, 23 Dec 2008 15:06:00 +0000

1. Using hamachi:-

Introduction:-
The Reason which stop you from connecting to remote computer using dynamic ip is that your isp provide you two ip one which is inside the Lan and other outside the lan this is that ip which change every time you On your computer or restart connection( so because of that conflict you can do remote connection with computer). so one way of doing remote connection would be by joining same lan(then we don't need to go outside the lan) and then connecting to the computer. therefore for this we use hamachi(software) which you can download from here.

Steps:-
1. As soon as downloading gets over install it into your computer in the process of installing it will ask you for
a) Your name
b) Network to join(you can create a network)
c) password of network(give password for that network)
here you can consider network as one lan and to join any network you must know password because you want to connect to your friends computer so tell your friend to join the network that you have created.
2. once hamachi is installed look at system tray you will found here a three green dots in traingular form (appeared) click on it.
3. then you will get a window as shown.

the ip shown on the above part of this window is your ip address and similarly your friend will get different one. after you both join the group you both will be listed into your network. hence now you can use these ip address for remote connection.
NOTE:- you can use my network
network: tarunkumarsinghal
password:tarun

2. Using Ammyy Admin
Introduction:-
other way of remote connection is using other software.
there are so many software on the web that can be used for remote connection. but most of them are so complecated that we first have to read about them on net before we use it. so to sovle this problem i have found one software which is very easy to use and operate. named ammy admin it is a free software.

Steps to use it for remote connection are as follow:-
1. downoad it from here.
2. start by double clicking.
3. a window will open ask your friend for it your id and write it into your windows box and click connect and that' it.
4. Now enjoy remote connection.
NOTE:-if you have static ip then you can refer to this page as well

How To Setup Remote Desktop Connection In Windows Xp Vista

singhalkumartarun@gmail.com (tarun kumar singhal) — Mon, 22 Dec 2008 16:14:00 +0000

Introduction:-
This software is used for establishing remote connection b/w to computer on the internet i.e., we can remotely control one computer from other. This is a microsoft product which comes in xp and later version of windows and for person having previous version of windows(like 98, 95) then they can download it from here.

How To Use it!!(Steps):-

1. First step would be to check which version of windows are you using if it is xp or later then it is fine but if have previous version of windows then download remote desktop connection from above mentioned site.

2. Now you have to remove all the restriction for remote desktop(follow steps to remove restriction):-

right click on my computer >> properties >>remote(tab) here check the box saying "allow user to connect remotely to this computer".
go to control panel >>windows firewall >>Exceptions(tab) here check box ahead of "remote desktop".

3. Once you have removed all restriction open remote desktop connection by going to

"Start>> All Programs>> Accessories>> Communication>> remote desktop connection"

by going this you will get a window similar to shown below.

4. Now in the box type(in window the appeared) the ip address of your friends computer and then click connect.
NOTE:-ip address can be found by typing ipconfig in his\her cmd(command prompt)

5. Now you will be prompted for user name and passward, ask your friend for his/her username and password of the computer login screen. fill it and enjoy remote connection(if password is not set then tell your friend set it otherwise you will not be able to connnect to her/his computer)

NOTE:-Before doing all of that you first must know, the computer you are connecting to has static ip or not, if not then you will not be able to do remote connection.(ask isp(internet service provider) for this)

Alternative:- if you do not have static ip addess then how to do remote connection

How to Download buffered video

singhalkumartarun@gmail.com (tarun kumar singhal) — Mon, 01 Dec 2008 17:28:00 +0000

Introduction:-
I have write this post for those person who, like me, could not see the video directly on browser may because of low speed.
An interesting thing about all the video that you see on browser before being displayed on screen is that it firstly download on your computer at "C:\Documents and Settings\"user name"\Local Settings\Temp" or at "C:\Documents and Settings\"user name"\Local Settings\Temp\Temporary Internet Files" with some name. the data stored at 2nd place can be retained but in first case there is a problem you can not access this data because during the browser is running this file can not be accessed(because whenever any process is taking place the cause of this process is locked) and after you turn browser off the data automaticaly deleted. Therefor here we use a tool which can stop the process and then can copy this data. named unlocker you can download it from here.

Steps:-

1. Find the file in above mentioned two directory(green colored string) with memory in range of Mb.

NOTE:-
a)the above mentioned file is of tmp extention.

b)see its memory by going through the property of file not by overing it.

2.Now, right click on this file and then go to unlocker. then you will get a window as shown below.

3.then, from the combo box(left bottom corner of window appeared) select copy.

4. now, it will prompt for address where you want file to be copied

5.Now, for playing this copied file first change tmp extention to flv and run it using any flv player like(km player or vlc player).

Watch Video on How to Download Youtube Video.

The End!

Send Email/Spam through Command Prompt using telnet?

singhalkumartarun@gmail.com (tarun kumar singhal) — Sat, 15 Nov 2008 14:06:00 +0000

Introduction:-
The Email in which we can set any mail from: content is called spam.

Note:-actually if the mail is not properly created(parsed) for example email with not subject in that case server assume that it is spam therefore some time when you send mail from yahoo to gmail the mail goes to spam.

It is to be noted here that we can not set mail from in our id therefore for that use telnet. in which we first make a connection with the server(if we want to send spam to person with gmail id then we should made connection with gmail smtp server) then give the detail as mentioned below:-

steps For sending spam/email using telnet:-

1) Firstly find out the smtp(simple mail transfer protocol) server for the network using which u want to send mail.

Note:-Q) how to find out stmp server of any network?
Ans:-using nslookup command as shown in the figure.

here in the figure what i have done is firstly i have typed nslookup command in cmd to find out the server address. next type "set type=mx" for finding mail exchange server and at last type the mail server from which u want to send mail for in my case i use "gmail.com" on entering it into your cmd after type=mx command you will get alot of address u can use any of them but in my suggestion choose toppest address and in figure the toppest address is alt1.gmail-smtp-in.l.google.com

2) Now after u have find out the smtp mail server type in cmd

telnet "mail server" 25

in my case mail server was alt1.gmail-smtp-in.l.google.com

3) Now u will be connected to the mail server, so now to begin, type in ehlo for esmtp(extended smtp) and helo for smtp type server in command window that appear after last step.

NOTE:- remember here to not mistake at there because here every thing that you type here will be counted so even backspace will be counted. so if you mistaken in here u have to leave it and type all thing again.

4) Now here you must type exactly what i say.

Type:- mail from: email id from where this mail is send from.
eg. mail from:

Now type:- rcpt to: email id to whom this mail go to.
eg. rcpt to:

Now type:- data

Type the message that you want to send.

Now at last type .(dot) after entering data

And that is it you have learned how send mail or spam using cmd.

NOTE:- it is important to note here that u can only send message (in most server) if you have static ip address or u can send message through the mail server that your isp has provided to you so contact your isp for free email id and stmp server.

You can see the video if you are uncomfortable reading

for sending mail online without loging into your account or going to cmd to any one u can use site http://fakesend.com/

Fake Email through Outlook

How to use Netmeeting For Audio Video Conferencing?

singhalkumartarun@gmail.com (tarun kumar singhal) — Fri, 31 Oct 2008 16:35:00 +0000

Introduction:-

Netmeeting is a program available on your computer(windows) that lets you communicate with other people. Among other things, you can show someone else what is on your computer, and you can see what is on their's. With a telephone, it works great to ask and answer questions about your computer, it provide following functionality used because of the fact that newer version support whiteboarding, application sharing, desktop sharing, remote desktop sharing (RDS) and file transfer.

Q) How to configure/start Netmeeting?

How to call person using Netmeeting?

to configure & starting your netmeeting type conf in run.

Now you will be prompted for name, email address, and some other thing so fill it.(it is not required that you should fill exact thing).

Now you will be asked for the connection type.(select accordingly).

Now after you have configured your netmeeting you should remove firewall from netmeeting by going to windows firewall in control panel-->exception tab here check netmeeting option.

Afterward you will get a screen like shown. type there the ip address of the computer(in the box selected)to which u want to to video conferencing, share remote.

That's it now you can talk to person on the other side using microphone.

Q) How to use Remote Desktop using netmeeting?

press the botton in netmeeting as shown.

Now a new window will appear as shown press remote desktop icon and then press share tab.

Now the person on the other side can access your computer remotely in your presence(remote desktop utility of window can only allow single person at a time to see desktop.

Note:- Firewall Setting.
Before establishing remote desktop connection you should see some firewall settings.

go to windows firewall then exception tab there check remote desktop.

now to to advanced tab here uncheck your lan through which u r connecting.

go to my computer property then remote tab here "allow remote desktop" must be checked

How to Chat in netmeeting?

For that just press the botton shown in first windows and then start typing in the box.

How to use WhiteBoard?

For using While board just press the botton as shown ahead to the question in first image and now u and the person on the other side can create image or anything simultaneously.

How to transfer file in netmeeting?

1) firstly press the button as shown just above then u will get a window as shown below.

2) then press the button 1 in the above and put the location of file u want to transfer.

3) now press button 2 in the above picture ( to send file).

4) That's it.

NOTE: Netmeeting when you have different lan ip and real ip.
now a days because of the shortage of ip address most of the internet service provider(isp) provide different lan and real ip.
real ip:-the ip through which u are connect to the internet.
lan ip:- the ip through which u are connect to your lan.
due to which we could not connect our computer using netmeeting. but there is a solution for that and that is hamachi
this is a software from logmein which is used for chat and file browsing perpose it is providing us static and real ip for the chat and file sharing and hence we are using the ip provided by hamachi for netmeeting.
for configuration of hamachi go see the video.
hamachi video

How to make pen drive bootable?

singhalkumartarun@gmail.com (tarun kumar singhal) — Wed, 29 Oct 2008 10:03:00 +0000

Introduction:-
Now a days many operating system are coming into market of linux. but because of the cost of original cd people usually download it from net and write it into cd and then run it. for testing an operating sysytem wasting the cd is not good task as well.So for testing there is a simple way to do it, and that way is making your pen drive bootable and installing OS into it,

Now the question arises that our pen drive is not a bootable device but we can make it bootable by creating track and sector on it by using software

Steps:-

Firstly format your pen drive into disired format which os require for example dos require fat 16 and all the newer versions support fat32 and ntfs.

Note:- windows in build utility does not provide you fat16 and many more formatting option so you have to do it using other utility search on google for required format.

Now create bootsector into your pen drive using the software

a) syslinux utility(command line e.g in cmd)

type "\syslinux.exe -m -a -d /boot/syslinux z:" (z=pen drive letter)

b) HP Drive Key Boot Utility (graphical).

1) install it into your computer.
2) now start it from start menu.
3) follow the simple steps and tell it to make your pen drive bootable.

How to use Microsoft Virtual PC or sun's Virtualbox?

singhalkumartarun@gmail.com (tarun kumar singhal) — Wed, 29 Oct 2008 08:15:00 +0000

Introduction:-
Both mircosoft virtual pc and virtualbox are virtuallization product which are used to install an operating system what ever it is (windows or linux) inside another operating system. it is very usefull for those person who needs to work on both linux and windows because using this software we can run both windows and linux at the same time and without any delay can switch b/w them.
download links for both these software is provided below.
1) microsoft virtual pc(only for windows system ).
2) Sun Microsystems virtual box(for all platform ).
both of these software are equally good for you but i prefer virtual box.
don't worry i will teach you both.

Q)How to use virtual pc?
Ans)
1) First of all you have to download it from the above link.

2) Now install it onto you system.

3) During installation it may require from you the detail and minimum requirement for the system(operating) that you want to install onto you windows system, Fill it accordingly(if you have a problem filling it than see the cd cover or search on google for minimum requirement.

4) If it does not ask for that or u haven't fill it during installation u can do it after installation as well for that u have to go start-->all program-->virtual pc.

5) On clicking it you will get a screen like shown here.

6) Now click onto setting button shown on that window then you will got another windows as shown below:-

7) Among all setting minimum (ram, harddisk is most). To fill it click a on left side of the image like on clicking memory for setting ram on harddisk 1 for setting harddisk.

8) you can enable or disable any other things that u want virtual box should give to operating system( that u want to install ) for examle in sound setting unchecking enable sound will disallow from using the sound card by the operating system inside the virtual pc.
9) On completing these setting press ok and now insert cd into the cd drive and press ok on the first winow of virtual pc.
10) Now u will be getting a new window(black) which looks similar to your starting boot screen.
11) And that it u can now install operating system in there or even can run live cd.

NOTE:-
Q) How to run virtual pc using iso image?
you can run virtual pc using an iso image for that do all the step as i have said and when black screen came go to the cd menu and press capture iso image in there and give location of iso image and you are done now. you can run virtual pc using iso image.

Q) How to use virtual box?
Ans)
1) After downloading virtual box using the above link install it onto your system.

2) Now after installing it run it by going to start-->all program-->Sun xVM VirtualBox-->VirtualBox.( you will get the screen as shown below.)

3) Now we have to do setting for operating system as we have done with virtual pc for that click onto general(blue in color).

4) Now in detail tab type name for the machine, os type and type the base memory(ram) required for the os u want to install on it.

5) don't change video memory value and if u want to modify it don't exceed it from you video ram's(not even equal to it) value because your operating system out side the virtual box also need some amount of video ram to display things.

6) And leave rest of the things as it is.(you can enable or disable things like cd rom or writer for that go to cd/dvd rom option.

7) Now you have done doing setting you can now start it by pressing start in first window of virtual box with green arrow.

NOTE:- like virtual pc here you can also use iso image instead of cd or dvd for that go to cd/dvd rom press iso image and link your iso image. and press start.

8) Now you will get the black screen which you will find when every time u start your computer.

9) And that's all you have done running virtual box.

NOTE:- virtualization create another machine onto your computer with different configuration according to os need.

How To change Ip address?

singhalkumartarun@gmail.com (tarun kumar singhal) — Tue, 28 Oct 2008 16:53:00 +0000

Introduction:-
Changing the ip address of a computer refers to spoofing ip address. actualy now you can not spoof your ip address because when you spoof your ip address and send the message on the network then the gateway from which your message passess to the server will not except your request because this gateway except request only from a computer that is under its range and because you have changed your ip so you are no more in its range therefore you will not be able to surf net. hence we tunnel through proxy to get ip address of proxy server and surf net with different ip address.
In tunneling through proxy or using proxy server our request is first send to the proxy server which then send this request to server and after proxy server get's the result of this request it send this result to our computer.
there are many site which u can use for surfing site like www.browser9.com where u can put the name of site which u want's to surf. there is an ulternative to that and that is by using software called ultra surf which tunnel our request directly. and providing a simple and easy way to surf net without going to proxy site to visit some site.
this is very simple to operate and free to use. You can download it from here

problem in ultra surf!
older version of ultra surf don't configure mozilla to surf for proxy surf so to make it work with ultra surf do as i say:-

go to tools in menu.
Now click options.
Now in new window click advanced tab then go to setting option in there.
Fill your proxy setting as i have filled(see image).

TIPS:-
for easier enable and disable of proxy setting in mozilla add a addon quick proxy that will display a image on which P is written u can make it red and green by pressing.
Here green indicate that proxy is enable and red indicate that it is disabled.

Any thing other than ultra surf!!!!!!!!

Ulternative of ultra surf!

vidalia bundle is a freeware integrated software used same as ultra surf do. it is an integration of privoxy and tor where privoxy is proxy server and the tor helps it to connect to proxy server.

this works on all the three mac os, linux and windows operating system.

you can download vidalia bundle for window using above link. and for linux and mac os go here

how to upgrade bios?

singhalkumartarun@gmail.com (tarun kumar singhal) — Mon, 27 Oct 2008 18:09:00 +0000

Introduction:-
BIOS stands for Basic Input/Output Service. it is a type of program which is stored inside the ROM chip(kind of memory like hard disk but very less) of your motherboard. So our main aim here is to update the bios stored inside ROM Chip.
Update of motherboard ROM depends on the type of memory chip used in your PC because There are two types of ROM chips used in PCs:-
1) Mask-ROM (used on old motherboards and that cannot be updated by software)
2) Flash-ROM (on almost all motherboards, which is able to be updated by software).
and because mask-rom can not be upgraded by normal user so i am leaving this upon you and will teach update of flash-rom bios.

NOTE:-Sometimes, especially when upgrading your PC, you may need to perform a BIOS upgrade in order to update your system to accept a new hardware part or to fix a bug.

STEPS:-
1) find out motherboard manufacturer, model number and bios manufacturer of your computer. You can find it by

viewing motherboard.

Using the software speccy.

2) Now go to the download center of motherboard manufacturer site and then fill the information of your motherboard and hit enter.

NOTE:-website address of some common motherboard manufacturer's site is listed here

3) Then u will be given 2 file(most probably) one will be .bin or .rom and other will be program(.exe file) according to your bios manufacturer.

NOTE:-program can be present in your driver's CD(comes with motherboard).

4) burn a cd with file(.bin or .rom) and the program(.exe).
5) Restart your computer.
6) Now boot your computer from cd(by choosing cd as first boot disc in your bios set-up(for that press del after restart).
7) type

"program name" /?

and use appropriate option for update .

for my bios i used:-

Awdflash F:\tx98-a22.bin /SN /PY /CC /R

where,

SN: (No Save)
PY: (Program BIOS)
CC: (Clear CMOS)
R: (Restart)

NOTE:-

u can download the file by tying the the model no of your motherboard in google(some of the site(like softpedia) will provide u the bin or rom file.
but u must download the program to upgrade your bios using the file from the motherboard manufacturer site or from cd.

For More information Click here

what is svchost.exe?

singhalkumartarun@gmail.com (tarun kumar singhal) — Mon, 27 Oct 2008 15:48:00 +0000

Introduction:-
Svchost.exe is a generic host process name for services that run from dynamic-link libraries (DLLs) in windows system.
During startup system create multiple instances of svchost.exe with each instance having some specific process that is defined in registry.
NOTE:- That's why you see many program named svchost.exe in task manager.

Q) where is it present?
Ans) it is present in the windir/system32 directory. As it is difficult for us to see which services are running in background or are contained by svchost.exe therefore there is a command to see all the process inside it.

tasklist /svc /fi "imagename eq svchost.exe"

here,

tasklist: it is used to display the program under task manager
arguments:-
- svc: this argument is used to see services running behind the process.
- fi: this argument indicate which of the program you want to select. with the name inside the double quote and also "imagename eq" ahead to file name.

Q) How To change Process in svchost?
Ans) The information of process to be start at startup is stored at HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SvcHost.
now u can change the process to be run at startup from there.
NOTE:-

Change registry at your own risk.
kill a process using command prompt:-
- press start.
- then go to run.
- type there cmd and hit enter
- then type taskkill /IM "process name"
- hit enter.

For more detail go here